High-Performance Marshell Electric Forklift Truck for Heavy Loads

• Customization: Available
• Cab Location: Not Adjustable
• Type: Electric Forklift
• Model NO.: CPD25M
• Load Capacity: 2 Tons
• Fuel: Electric
• Load center: >500mm
• Lift height: 3000~5000mm
• Condition: New
• Operation Type: Seated
• Turning Radius: 2080
• Max. Lifting Height: 3000h mm
• Wheelbase: 1485 L1 (mm)
• Total Weight(with Battery): 4050kg(with Battery)
• Transport Package: Container
• Specification: CE
• Trademark: Marshell
• Origin: China
• HS Code: 842890
• Production Capacity: 2000 Pieces Per Month

Product Description

Marshell Electric Forklift Truck with High Quality(CPD25M)


Electric Forklift Advantages:

1. AC system precise control, CAN bus technology multiple protection, safe and reliable.

2. Powerful, driving, leading lifting and climbing performance.

3. Overhead guard and body welding monolithic structure, the overall strength more higher.

4. HMI design of the control handle, easy for left and right hand operation, improve the driving comfort. 

5. Small turning radius, good passing performance.

6. 1. Mast drop cushioning and comfortable vehicle operation.

7. Intelligent deceleration turning design, improve the stability of the vehicle during traveling, to avoid tipping cargo.1. (Optional)

Electric Forklift Technical Parameters:

Model			CPD25-MA1
Power Type			Electric
Operator Type			Seated
Load Capacity	Q	kg	2500
Load Center	c	mm	500
Load Distance	L2	mm	435
Wheelbase	L1	mm	1485
Mast Tilt Angle,F/R	α/β	°	6/12
Height with Mast Retraction	H1	mm	2050
Free Lifting Height	H3	mm	140
Max. Lifting Height	H	mm	3000
Height with Mast Extended	H2	mm	4025
Overhead Guard Height	H4	mm	2125
Ground Clearance at Seat		mm	1070
Height of Traction Pin		mm	308
Overall length (With Fork)	L	mm	3400
length (Without Fork)	L'	mm	2330
Overall Width	W1	mm	1265
Forks Size	TxWxL4	mm	40/122/1070
Fork Carriage Standard			ISO2328 2A
Width of Fork Carriage		mm	1038
Fork Adjustment(Outside of Fork)	W5	mm	247-995
Ground Clearance at Mast(Loaded)	H5	mm	115
Ground Clearance at center of wheelbase(Loaded)	H6	mm	120
Right Stack Aisle Width (Pallet size 1000*1200,clearance 200mm)	Ast	mm	3715
Right Stack Aisle Width (Pallet size 800*1200,clearance 200mm)	Ast	mm	3915
Turning Radius	r	mm	2080
Total Weight(With Battery)		kg	4050
Front Axle Load( Loaded)		kg	5820
Rear Axle Load( Loaded)		kg	730
Front Axle Load( Unloaded)		kg	1745
Rear Axle Load(Unloaded)		kg	2305
Tyre Type			Pneumatic
Tyre(Front)			23×9-10-18PR
Tyre(Rear)			18X7-8-14PR
Tyres Number (x=drive wheel)			2x/2
Tread(Front)		mm	1058
Tread(Rear)		mm	950
Traveling Speed(Loaded/Unloaded)		km/h	14/15
Lifting Speed(Loaded/Unloaded)		mm/s	260/430
Lowering Speed(Loaded/Unloaded)		mm/s	450/410
Max.Gradeability(Loaded/Unloaded)		%	15/20
Service Brake Type			Hydraulic
Parking Brake Type			Mechanical
Drive Motor Power(S2-60 Minutes)		kW	0:00:00
Lifting Motor Power(S3-15%)		kW	0:00:00
Battery Voltage/Capacity K5		V/Ah	48/630 (600-x-700)
Battery Weight		kg	990 (930-1200)
Max. Battery Size		mm	964x580x675
Controller Brand			CURTIS
Controller Model			1234SE+1232SE
Pressure of Hydraulic System		bar	140
Flow Rate of Hydraulic system		L/min	65
Hydraulic Tank Capacity		L	35
Noise Level		dB	72

 

Who is Marshell?

 

Marshell was founded in 2002 with two business units, Electric Vehicle and Electronics. The core business of Marshell Electric Vehicle is in the research, development and manufacture of low-speed electric vehicles including mobility scooters, golf carts, resort and utility vehicles, etc. 

 

Whereas, Marshell Electronics, of automotive and home power products including battery charges, battery maintainers, power inverters, jump starters, portable power domes, solar power extenders, etc.

 

How do you benefit?

 

Working with Marshell, you can enjoy considerable benefits with added values:

 

The full spectrum of electric vehicles, automotive and home power products of the highest possible standards of quality and performance.

 

Great flexibility of production capacity enables you to fast meet the market change and demand with our two ISO9001:2000 certified factories, strategically located in Zhaoqing and Shanghai with a total of 210,000 m2 of fully equipped workshops.

 

Cost down on your existing products to regain your competitiveness and market shares with our proven quality and competitive price.

 

Full service and support on product upgrade and new product engineering, fast to market at minimized cost with our engineering team of more than 100 engineers for OEM and ODM projects.

Company Information